FlexKraft 2 - Powerstax

FlexKraft 2

KraftPowercon’s next-generation modular DC rectifier for electrochemical applications.

Built on SiC semiconductor technology with a digital CAN bus architecture, FlexKraft 2 delivers

  • 92% typical efficiency
  • ~1% current ripple
  • up to 20 independently regulated outputs per stack, managed by a single control module

 

Technical specification:

Supply voltage: AC 400-520V +/- 10 %, 50/60 Hz, 3 phase
Output range: 1 – 150 VDC

1 – 40.000 ADC

Power factor: ≥0.9 @ rated load
Efficiency: Typically 0.92 @ rated output
DC ripple: ~1%
Control precision: Voltage/current <+/- 1%
Regulation range: Stepless at constant voltage or current, 0–100 %
Cooling: Air or water cooling
EMC conformity: •       EN 61000-6-4, Emissions

•       EN 61000-6-2, Immunity

Ambient temp: Max. 45 ˚C, de-rated operation up to 55 ˚C (air-cooled)

Max. 55 ˚C (water-cooled)

 

Available as air cooled or water cooled, including polarity reverse option.

 

With the FlexKraft 2 plating rectifier, you can achieve:

Consistently High Plating Quality

  • Low ripple and high accuracy
  • Independent C/V settings on each half-power module enable granular power distribution in baths/cells, thus high process controllability

 

Exceptional Reliability, Low Maintenance

  • Proven technology, using high-quality components, assembled in Sweden
  • Modular design means production can be continued at less output in case of a module failure
  • Minimized planned and unplanned downtime (a module can be exchanged in about 15 min)

 

Operational Efficiency

  • Reduced energy consumption (Silicon Carbide technology)
  • Optimized output and less scrap in production
  • Dual /multi output mode operation enables space saving and reduced investment cost.
  • Inventory cost optimization (one critical spare part /power module fits to the entire range of the rectifiers regardless size)

 

EHS

  • Reduced acoustic levels thanks to the adaptive fans speed control which adjusts to actual thermal load
  • Lowered CO2 contribution given less energy & potentially less scrapped production
  • Easy front access for maintenance and repair

 

High Flexibility

  • Each stack is built up by 1-10 power modules, and can be configured with up to 20 rectifier outputs with one control module.
  • Up to 5 Towers can be connected in a Master/Slave configuration; empty module slots can be built in for future scaling.

 

FlexKraft Vs FlexKraft 2

  • Higher power density
  • Higher efficiency
  • Smarter process control.
  • Same footprint
  • Same modularity and reliability you trust.

 

Watch the KraftPowercon FlexKraft2 Launch Webinar

 

Email sales@powerstax.com for information.

 

 

Primary Application

Additional Applications